Andrew Camarata
Andrew Camarata
  • 369
  • 100 249 195
  • 100
  • Joined Aug 17, 2014
Videos from my property maintenance business.

Video
Clearing trees around a house
Clearing trees around a house
6 days ago
Using a Bobcat 864 CTL to remove some trees growing near a house for a landscaping project.
Mowing an overgrown field
Mowing an overgrown field
7 days ago
Using a case compact track loader and a 6โ€™ rotary mower to mow paths through an overgrown field.
Moving a box truck body
Moving a box truck body
11 days ago
Using a Bobcat t300 track loader and a tractor to load a box truck body on a deck over trailer to move it.
Moving a building
Moving a building
13 days ago
Moving a building 30 feet that was slightly over a property line. Using a backhoe and skid steer to slide it.
Screening different size rocks
Screening different size rocks
21 day ago
Using a skid steer mounted flip screen to make 3 different sizes of material. Screener available here: amzn.to/2LNIgbu More info: www.flipscreenglobal.com
Pulling down dead trees
Pulling down dead trees
23 days ago
Using a tractor to pull a couple dead trees down that were near a house.
Mowing an overgrown woods road
Mowing an overgrown woods road
24 days ago
Using a skid steer mower to widen up a woods road that was being over grown with pine trees. Mower: www.extremeimplements.com/brush-cutters.html
Hauling away scrap metal
Hauling away scrap metal
26 days ago
Removing scrap metal. 0:00 explaining project 6:00 dealing with 3 dump body's 11:00 scraping a pickup body trailer 15:50 loading a school bus body on a trailer 24:43 loading a dump body on a trailer 25:38 loading a box truck body on a trailer 30:17 demoing a old mobile home carport 1:11:50 burning a scrap wood pile 1:16:49 loading scrap, moving bluestone pallets, pulling a tree down
Installing a gravel pad for a camper
Installing a gravel pad for a camper
Month ago
Doing some tree cleanup, and brining in gravel to prepare a property for a camper. Mud flap holder: amzn.to/2ZaEB9R Laser level: amzn.to/2N8yAYS Equipment laser receiver: amzn.to/31Gs4fW
Replacing a fuel line in a SUV
Replacing a fuel line in a SUV
Month ago
0:00 replacing a rusted out fuel line on a Mitsubishi Montero SUV 20:15 Installing a tow hitch on a Honda Civic car 26:20 jetski riding
Fixing my driveway
Fixing my driveway
Month ago
Spreading shale on a few areas of my driveway that needed maintenance.
Screening top soil
Screening top soil
Month ago
Using a new skid steer mounted top soil screener to screen dirt for a lawn. www.flipscreenglobal.com Available here: amzn.to/2LNIgbu
Installing a fence and planting trees
Installing a fence and planting trees
Month ago
Adding 3 more panels to an exisiting privacy fence and planting a few trees.
Levi's 13th birthday
Levi's 13th birthday
2 months ago
Levi the dog's 13th birthday. 0:00 wake up and breakfast 1:34 visiting ben the black lab 4:29 going out on the waverunner 9:03 hiking to the top of the mountain 13:42 visiting a lake 18:23 picking up Sadie the golden retriever
Pouring a concrete slab in a carport
Pouring a concrete slab in a carport
2 months ago
Pouring a 24'x14'x6" concrete slab under an existing car port.
Refurbishing a 5 ton equipment trailer
Refurbishing a 5 ton equipment trailer
2 months ago
Refurbishing a 5 ton equipment trailer: 0:00 explaining the project 1:44 remove wood deck 3:32 fixing broken frame 12:00 cutting diamond plate inner fenders/metal decking 16:05 paint wheels, installing wheel bearing 23:23 welding down deck 36:14 installing lights 41:05 tilt trailer to weld bottom 50:00 painting 1:01:34 wiring lights 1:11:44 installing reflective tape 1:12:18 talking about wood vs steel deck 1:18:02 First time using trailer, moving antique tractor to parade 1:21:38 stickers/moving a small car 1:25:28 Talking about tying down equipment 1:34:36 Bringing tracked skid steer to a small job 1:40:18 towing a pickup truck Tools I used: Chain/binders: amzn.to/2XDqfTB Paint sprayer: amzn.to/2xI2Vou Solder tool: amzn.to/2YMGLwY shrink tube: amzn.to/2JrrBIj solder/shrink tube: amzn.to/2JpZRUy heat gun: amzn.to/2LSeIIO solder holder: amzn.to/2YKLFur Welding stuff: cheaper at your local weld shop
Setting trusses with a boom lift
Setting trusses with a boom lift
2 months ago
Setting roof trusses with a Condor boom lift.
Servicing the UTV
Servicing the UTV
2 months ago
Servicing a 2006 Yamaha Rhino UTV 0:00 Into and welding a broken frame 1:41 rear brakes 4:28 front brakes, tighten steering box bolts 6:24 installing new fuel pump 8:27 testing
Fixing a driveway
Fixing a driveway
3 months ago
Using a Mini excavator and compact track loader to fix a gravel driveway. Installing drainage, widening the driving way, fixing potholes, spreading gravel, and taking down a few trees.
SUV service
SUV service
3 months ago
Installing a new exhaust mid pipe, rear brakes, and air helper spring in a 2002 Mitsubishi Montero Sport SUV
Brush mowing an island
Brush mowing an island
3 months ago
Using a walk behind brush mower to mow a small island.
Digging out stumps
Digging out stumps
3 months ago
Digging out stumps around a house. Video fixing tractor steering: usa-video.net/IH_d8CVrOYU-video.html
Buying more cheap Waverunners
Buying more cheap Waverunners
3 months ago
Buying a broken XL700 and Waverunner 3 fixing them, and riding them.
Fixing a steering cylinder on a tractor
Fixing a steering cylinder on a tractor
3 months ago
Installing a fixed steering cylinder on a Ford/New Holland 1520 tractor. Then installing a guard to protect it from being damaged. The video where I break the tractor should be up by 6/15/19
Installing an underground electric service
Installing an underground electric service
3 months ago
Digging a trench and installing a primary underground electric service for a new house.
Cleaning up a tire dump
Cleaning up a tire dump
3 months ago
Using a skid steer to clean up a pile of tires/garbage, spread gravel, and move a shipping container
Installing a new driveway
Installing a new driveway
3 months ago
Using an excavator to dig out stumps, loading saw mill logs, dragging in a shipping container, and trucking in gravel to make a new driveway.
Installing a wheel bearing in a dump truck
Installing a wheel bearing in a dump truck
3 months ago
Installing a new front wheel bearing in a 1987 Ford F800 dump truck.
Fixing the other $50 Wave Runner
Fixing the other $50 Wave Runner
4 months ago
Fixing a 1988 Yamaha Wave Runner 500 that was part of a pair I bought the previous season seen in this video: usa-video.net/JEq86kHLhFQ-video.html
Setting up a shipping container cabin
Setting up a shipping container cabin
4 months ago
Spray foam insulating a shipping container. Using a bulldozer to clear a new road Dragging the shipping container into place Tour of the finished container cabin
Buying a skid steer mower
Buying a skid steer mower
4 months ago
Buying a 72" skid steer mower and testing it out.
Spreading top soil
Spreading top soil
4 months ago
Using a IHI CL35 compact track loader to spread out top soil and planting grass.
Cleaning up garbage after a demo job
Cleaning up garbage after a demo job
4 months ago
Using a Kubota KX121-3 excavator and IHI CL35 tracked skid steer to clean up garbage after to finish a demolition job.
Burying another propane tank
Burying another propane tank
4 months ago
Using a Yanmar b37 excavator and IHI CL35 skid steer to install an under ground propane tank for a pool heater.
Making an excavator bucket pin
Making an excavator bucket pin
4 months ago
Making a replacement bucket pin out of hydraulic cylinder rod for a Kubota KX121-3 with a pin on thumb.
Fixing gravel drive ways
Fixing gravel drive ways
5 months ago
Using a tractor, skid steer, and dump trucks to do a little maintenance on gravel driveways after plowing in the winter time.
Servicing my small equipment trailer
Servicing my small equipment trailer
5 months ago
0:00 into to the project 3:40 fixing the ramp hinge 7:44 fixing the jack 9:25 unbending the ramps 12:18 installing new lights 19:40 pressure washing 20:54 fixing tail light on truck 23:31 painting trailer 24:35 changing tire 25:13 showing finished trailer 26:08 12 year old photos of the trailer 34:19 trailer driving down road
Snowmobile riding with Levi
Snowmobile riding with Levi
5 months ago
Snow mobile riding with Levi the dog. March 2019
Burying a propane tank for a generator
Burying a propane tank for a generator
5 months ago
Video showing most of the excavation phase of installing a automatic backup generator at a residential house. Burying the propane tank to hide it.
New seat and leaf springs in a Dodge pickup truck
New seat and leaf springs in a Dodge pickup truck
6 months ago
Working on a 1999 Dodge ram 2500 pickup truck 0:00 wash truck 3:24 touch up paint 4:10 installing new seat cover/foam 10:00 Installing leaf springs from a 3500 dodge truck 24:16 - 39:06 Driving in the truck and talking about rusty trucks. Rust proof brake lines: amzn.to/2Ye0wOc Auto repair lift: amzn.to/2OoXORC Impact wrench: amzn.to/2uqHwhY
Winching a fallen tree off a cliff
Winching a fallen tree off a cliff
6 months ago
Using a UTV and a 6 ton electric winch to pull a fallen tree that had blown over in and was hanging from another tree. Winch: amzn.to/2Oagbt6 Winch mount: amzn.to/2W390G7 Track pieces: www.ebay.com/itm/183735799062
Excavator thumbs
Excavator thumbs
6 months ago
0:00 into to excavator thumbs 2:05 Demonstrating a Geith thumb on a Hitach ex100 excavator 5:38 Demonstrating a Homemade? thumb on a Komatso PC15 excavator 10:14 Demonstrating a thumb on a Yanmar B50 excavator 12:53 Demonstrating a hydraulic thumb on a Kubota KX121-3 excavator 16:09 Installing a EA thumb on a Yanmar B37 excavator 22:34 Demonstrating the newly installed thumb on the B37 and comparing with the a hydraulic 29:03 Demonstrating why the thumb needs to be the correct length 31:24 Talking about adding thumbs to backhoe tractors 36:30 Track pad pieces available 37:59 video ending Track pieces: From my friend $40: www.ebay.com/itm/183729723880 T shirts: www.ebay.com/itm/183390302680 More track pieces: www.ebay.com/itm/183735799062
Fixing up the new Yanmar excavator
Fixing up the new Yanmar excavator
6 months ago
Fixing a bunch of small problems on my new Yanmar B37 excavator to get it ready to work. 0:00 Intro, install hydraulic breather 1:12 fixing the blade 5:14 black spray paint 5:46 engine oil change 8:20 change oil in final drive 10:38 brush on yellow paint 12:36 print new decals 13:57 fixing the hammer I broke in the quick change video 16:17 installing one new track/rollers 23:40 Converting two more buckets to quick change 31:28 installing new seat 35:09 Finishing installing the tracks 42:27 Comparing the b37 to the b50 Anyone want any track pieces?
Soldering a forklift radiator
Soldering a forklift radiator
6 months ago
Removing a radiator in a Cat T40DSA fork lift, soldering a few leaks in the radiator, then re-installing the radiator.
Modifying an excavator bucket
Modifying an excavator bucket
6 months ago
Modifying a grading bucket for an excavator to increase its capacity and fix the closed angle. Using a mig welder and a plasma cutter.
Flow testing excavators to run a hammer and breaking rocks
Flow testing excavators to run a hammer and breaking rocks
6 months ago
Conducting a hydraulic flow test on a Yanmar b37 and Kubota KX121-3 excavator to set the hydraulics right to run jack hammers. Then comparing the Tramac hammer on the Yanmar and the Rockblaster hammer on the Kubota. rbhammers.com/
Live stream second attempt
Live stream second attempt
6 months ago
Live stream second attempt, drawing in google sketchup
Getting logs ready for the sawmill
Getting logs ready for the sawmill
8 months ago
Cleaning up a few dead pine and hemlock trees and loading them onto a trailer headed to a saw mill. Using a Kubota kx121-3 Jesse's video sawing and installing the wood: usa-video.net/pf8CIghVYzU-video.html
Working on the new Kubota excavator
Working on the new Kubota excavator
7 months ago
Servicing the new Kubota excavator: 0:00 stacking a fire and into 2:00 Pressure washing 6:03 Change final drive gear oil 7:17 Greasing 10:35 Fixing the work lights 17:31 operating the machine
Snow plowing and truck maintenance
Snow plowing and truck maintenance
7 months ago
Snow plowing and some plow truck maintenance on a 1999 Dodge ram 2500 pickup with a Western Plow.
Snowmobile riding
Snowmobile riding
7 months ago
Snowmobile riding with Levi the dog.
Installing a quick change coupler on an excavator
Installing a quick change coupler on an excavator
7 months ago
Installing a Kubota style quick change bucket coupler on a Yanmar b37 excavator. Buying the pin on system. Than welding on coupler ears on a bucket and a hammer. Quick change ears for sale: amzn.to/2Gy7Ldo
Replacing a cutting edge on an excavator blade
Replacing a cutting edge on an excavator blade
7 months ago
Replacing an heavily worn out cutting edge on the dozer blade; Kubota KX121-3 excavator. Tools available: Plasma cutter: amzn.to/2UJDpZh Welder: amzn.to/2GfrvDr Stick welder: amzn.to/2DVJwEb
Snowplowing and snowmobiling
Snowplowing and snowmobiling
7 months ago
Plowing snow and working on/riding a Yamaha Bravo Long track snowmobile
Buying a new skid steer
Buying a new skid steer
8 months ago
Buying a used IHI CL35 compact track loader, freeing up a frozen bucket latch, and moving some boulders with a grapple bucket.
Pickup truck tune up
Pickup truck tune up
8 months ago
Replacing spark plugs and one valve cover gasket in a 1999 Dodge 2500 pickup with a 360 gas engine.
Replacing a AHC computer
Replacing a AHC computer
8 months ago
Troubleshooting a non-moving bucket on a 1999 Bobcat 864 skid steer loader. Than replacing the AHC computer.
Hammering a septic line
Hammering a septic line
8 months ago
Using my new hammer to break rock to make a septic line deeper on a new house.
Buying the cheapest excavator/hammer on Marketplace
Buying the cheapest excavator/hammer on Marketplace
8 months ago
Re Upload; Buying a well used Yanmar b37 excavator with a hammer. And testing it. And a well used Kubota kx121-3 excavator.
New front brakes on a Mitsubishi SUV
New front brakes on a Mitsubishi SUV
8 months ago
Installing new front brakes (calipers, rotors, pads) on a 2002 Mitsubishi Montero Sport SUV.
Fixing and talking about cameras
Fixing and talking about cameras
9 months ago
Installing a new camera sensor in a Gopro hero 5 camera. Than talking about cameras: Removu K1: amzn.to/2Rk8Ye2 Gopro hero5: amzn.to/2Lw3OGB Gopro hero 7: amzn.to/2BAYZr8 Mavic pro: amzn.to/2BBL8kn Mavic Air: amzn.to/2V0BPTM
Upgrading and talking about computers
Upgrading and talking about computers
9 months ago
Adding memory, a M.2 drive, and a solid state drive to my current computer. Than talking about all my old computers Shirts: www.ebay.com/itm/183390302680 Last track listing: www.ebay.com/itm/183624299734 Track listing (sold): www.ebay.com/itm/183618111177 Track listing (sold) www.ebay.com/itm/183612706263 Track listing (sold): www.ebay.com/itm/183605559156 Track listing (sold): www.ebay.com/itm/183599973960 Track listing (sold): www.ebay.com/itm/183595082032
Moving logs and splitting fire wood
Moving logs and splitting fire wood
9 months ago
Trucking away saw mill logs, fire wood logs, than splitting some fire wood.
Delivering gravel to a muddy driveway
Delivering gravel to a muddy driveway
9 months ago
Tailgating gravel on a muddy driveway.
Pushing in a new driveway with a dozer
Pushing in a new driveway with a dozer
9 months ago
Using a 1988 Cat D4c dozer to rough in a new driveway down a hill.
Cleaning up dumped wood
Cleaning up dumped wood
9 months ago
Removing some logs that were dumped off a hill side.
Spreading out gravel and moving brush
Spreading out gravel and moving brush
9 months ago
Trucking in gravel and spreading it out to cover a driveway and parking area. Than moving some brush around to make a pile
Filling gravel around a new building
Filling gravel around a new building
9 months ago
Filling gravel around a new building foundation.
Burning brush and surfacing a driveway with gravel
Burning brush and surfacing a driveway with gravel
9 months ago
Burning a brush pile, grading the area, than surfacing a driveway with gravel.
Fixing a drainage issue on a driveway
Fixing a drainage issue on a driveway
9 months ago
Using a mini excavator to dig out a drainage trench next to a driveway, and remove a bad culvert pipe to stop water from running down the driveway surface.
Fixing and talking about chainsaws
Fixing and talking about chainsaws
9 months ago
0:00 Introduction to the chain saws in the video 3:04 Demonstrating a Poulan Pro 260 4:52 Demonstrating a SkilSaw 1616 7:10 Fixing a pull start in a Stihl 13:18 Installing a new piston and head in a Stihl 036 28:22 Installing a new carb and fuel line on a Craftsman 3.7/Poulan 3700 42:48 fixing a vintage Mall 12a chainsaw 1:24:13 Talking about a vintage Mercury 2 man saw 1:25:27 Sharpening chains 1:32:16 Talking about my first chain saw 1:39:05 Talking about chain saw saftey and cutting some dead trees 1:48:49 Talking about scaling logs and ending Product links: Log scale: amzn.to/2E3ds2A Cheap chainsaw: amzn.to/2DPOAud Chainsaw safety gear: amzn.to/2DNnRym sharpener in this video: amzn.to/2P8SeBA expensive sharpener: amzn.to/2SdkbtG log roller: amzn.to/2Qk4JPt
Installing a small culvert pipe
Installing a small culvert pipe
9 months ago
Using a Komatsu PC15 excavator to install a 8"x20' culvert pipe under a driveway to fix a water drainage problem. Than dump spreading gravel to re-surface the driveway.
100,000 subscriber special
100,000 subscriber special
10 months ago
0:00-3:35 cutting track 3:36-end talking Last track listing: www.ebay.com/itm/183624299734 eBay track listing 10 (sold): www.ebay.com/itm/183618111177 eBay track listing 9 (sold): www.ebay.com/itm/183612706263 eBay track listing 8 (sold): www.ebay.com/itm/183605559156 eBay track listing 7 (sold): www.ebay.com/itm/183599973960 eBay track listing 6 (sold): www.ebay.com/itm/183595082032 eBay track listing 5 (sold): www.ebay.com/itm/183582969257 eBay track listing 4 (sold): www.ebay.com/itm/183577083286 eBay track listing 3 (sold): www.ebay.com/itm/183568616919 eBay track listing 2 (sold): www.ebay.com/itm/183560578807 eBay track listing 1 (sold): www.ebay.com/itm/183549528228 Ebay shirts: www.ebay.com/itm/A-Camarata-Property-Maintenance-T-shirts/183390302680 Old photos: www.hillbillyhobbies.com/PictureWorld/index.php?twg_album=Andrew+Pictures Forum to go with old photos: hillbillyhobbies.com/forum/
Replacing a culvert pipe
Replacing a culvert pipe
10 months ago
Replacing an undersize rusted out culvert pipe under a driveway that could not keep up with the water flow. Installing a 2'x20' pipe with a 1990 Yanmar b50 excavator.
Digging a Oak stump out of rocky ground
Digging a Oak stump out of rocky ground
10 months ago
Digging out an oak stump out of rocky soil with a 1990 Yanmar b50 excavator
Fixing a bunch of small engines
Fixing a bunch of small engines
10 months ago
Fixing small engines: 0:00 fixing a Yamaha atv that wasn't broken 8:10 fixing a mini motor cycle and goped scooters 22:30 Welding the blade on a push mower 25:27 New pull rope in a chainsaw 31:18 fixing the carb and a bent crank shaft on a lawn mower 35:46 fixing carb and cable on a lawn mower 46:34 fixing a lawn tractor that wasn't broken Similar mini motorcycle: amzn.to/2DweF2a Goped scooter: ebay.to/2PesY1A Tire slime: amzn.to/2OxXu1l
Fixing a tractor
Fixing a tractor
10 months ago
Fixing a 1993 Ford 1520 tractor. Fixing an overheating problem, and doing some body work. Than mowing a field.
Preparing a site for a monolithic slab
Preparing a site for a monolithic slab
10 months ago
Using a Yanmar b50 excavator to prepare a site next to a garage for an addition. Laser level: amzn.to/2Q43jVM
Digging drainage on a driveway hill
Digging drainage on a driveway hill
10 months ago
Using a 1995 Hitachi EX100 excavator to dig out a drainage trench on the side of a driveway with a hill.
Digging a drainage swale on the edge of a driveway
Digging a drainage swale on the edge of a driveway
10 months ago
Using a 1993 Ford 1520 tractor to dig a drainage swale on the side of a driveway to correct a drainage issue.
How to use a Plasma cutter
How to use a Plasma cutter
11 months ago
Explaining the basics on how to use a plasma cutter; cutting out a steel plate that was missing on a skid steer loader. Plasma cutter: amzn.to/2S0QKzE Soap stone: amzn.to/2PK7p5a Grinder: amzn.to/2R5u0t8 Cutting torch: amzn.to/2PO0x6U
Installing a drive motor in a tracked skid steer
Installing a drive motor in a tracked skid steer
11 months ago
Going over the symptoms of a bad drive motor, removing, and replacing it with a rebuilt motor. In a 1999 Bobcat 864 skid steer loader. The rebuilt drive motor came from www.texasfinaldrive.com/
How to install an excavator track
How to install an excavator track
11 months ago
Installing a new replacement rubber track on a 1990 Yanmar B50 excavator. Grease gun: amzn.to/2yIvZfu
Digging up a dry well for no reason
Digging up a dry well for no reason
11 months ago
Digging up a dry well (an underground structure that disposes of unwanted water). Where the water had been flowing out of the ground to look for a broken pipe. Once it was dug up we realized the whole ground was saturated with water, due to a water filter that had been sending water to the well constantly for a couple weeks. Than filling it back in.
Buying a UTV
Buying a UTV
11 months ago
Buying a 2006 Yamaha Rhino (Utility Task Vehicle / side by side). Going over the first four months; riding, working, repairs, and upgrades. Links: 4.25โ€ fender flares: amzn.to/2NEYPTv 2.5โ€ fender flares: amzn.to/2RKmyow 1.75โ€ fender flares: amzn.to/2ROfMxU Fender flare sample kit: amzn.to/2CGfKUI Tire sealant: amzn.to/2CaKiwC Light bar: amzn.to/2CIjOUr Winch: amzn.to/2NJdnle Tube bender: amzn.to/2pPr4oT Auto lift: amzn.to/2RJ7Z4N
Fixing a pickup truck exhaust and talking about trucks
Fixing a pickup truck exhaust and talking about trucks
11 months ago
Replacing two rusted out sections of exhaust pipe on a 1999 Dodge pickup. 7:30 Talking about how trucks are built. Link to buy auto repair lift: amzn.to/2PvuCYL
Moving a broken motor home
Moving a broken motor home
11 months ago
Trying to get a motor home running that has not ran for 7 years. Than driving it where it needed to be.
Fixing a fiberglass boat
Fixing a fiberglass boat
11 months ago
Doing a body repair on a 1958 Tomahawk Ski-mate fiberglass boat fixing an area that was damaged in a collision. 0:00 Showing the damage 0:55 Grinding the cracked area 2:33 Fiberglass 8:21 Body filter 11:36 Sand/paint 16:00 Showing finished repair 16:49 Testing the boat in the water 18:55 Island exploring with Levi the dog 22:18 More boating
Pushing Oak trees away from a house
Pushing Oak trees away from a house
11 months ago
Pushing down a few oak trees that are leaning towards a house with an excavator.
Pouring a concrete pad infront of a shed
Pouring a concrete pad infront of a shed
11 months ago
Pouring a 6" concrete pad in front of a new pre-fab shed. Than re-visiting a concrete slab I did last year. Videos from last year pour: Pour: usa-video.net/UfvAc7HX7C4-video.html Demo shed/drainage: usa-video.net/PtNnrwJzimA-video.html 0:00 showing up to the job 1:47 setting form stakes, vapor barrier, and rebar 3:29 pouring concrete 10:54 looking at it finished 11:45 revisiting a slab I did last year
Fixing a driveway and digging behind a building
Fixing a driveway and digging behind a building
11 months ago
Fixing a section of driveway with a water drainage issue. Digging out behind a building to dry out the building, moving a camper, spreading out gravel, and clearing some trees. 0:00-5:15 Explaining the work 5:16 spreading out gravel and move camper 10:29 Digging a drainage ditch on the side of a driveway hill 17:59 Clearing some trees and digging out behind a building
Cleaning up rocks and spreading out gravel
Cleaning up rocks and spreading out gravel
11 months ago
Cleaning up an area with rocks and junk left over from a landscaping project, than brining in gravel and spreading it out. 0:00 explain job and looking at previous work that was done 2:05 start job with bobcat 743b loading wood 5:53 loading dirt/rocks in dump truck with bobcat 9:14 Talking about the bobcat not working right 12:06 New battery's for dump truck 15:49 loading in dump truck still 18:40 talking about bobcat breaking 21:23 Brining the Yanmar excavator to the job 32:35 Driving the International down the mountain 37:29 Finish loading rocks 40:08 Delivering and spreading gravel 45:13 Showing the finished work
Installing a new clutch brake in a dump truck
Installing a new clutch brake in a dump truck
Year ago
Installing a new 2 piece clutch brake in a 1987 International paystar dump truck with a fuller 8LL transmission. 0:00 explaining the problem 3:13 starting the repair 9:20 Demonstrating how it works with the engine running 10:37 demonstrating how it works inside the cab 11:35 driving it with it fixed
Buying the cheapest WaveRunner on Marketplace
Buying the cheapest WaveRunner on Marketplace
Year ago
Buying a broken 1993 Yamaha Wave Runner 650LX, fixing it and taking it out riding. 0:00 Bringing them home 3:37 Looking at them before doing any work 5:18 spraying oil in engine 6:19 Pressure washing 9:19 Unseize engine, electrical work, all other work, and starting it 29:27 installing new carb 33:47 starting engine 37:43 new battery 39:21 fix hood 42:06 seat cover 43:17 talking about registering it and required gear to carry 46:20 Jet drive bearing assembly 57:09 New trailer boards 59:36 Talking about it all finished 1:01:07 Riding it 5-2019 video of fixing the other wave runner usa-video.net/-aiQiC4PlZs-video.html
Levi's 12th birthday
Levi's 12th birthday
Year ago
Celebrating Levi the dog's 12 birthday party. 0:00 waking up and eating 1:52 visiting his friend Dusty 3:11 birthday cake 3:32 visiting Sadie and Daphne 9:59 visiting Levi's brother Beau 12:55 going boating with Levi 17:30 Bringing Levi to Kaaterskill falls 24:11 2006 video from Levi as a puppy
Digging a drainage trench
Digging a drainage trench
Year ago
Re-visiting a site to add a drainage trench to fix a puddle area that arose after a recent fill job. Using a Yanmar b50 excavator and ford 1520 tractor. 0:00 unload excavator 0:21 dump gravel 0:45 new tripod/fix ford truck door handle 2:21 measure and explain job 5:00 start digging 8:29 move gravel/pipe into trench 13:54 second load of gravel 18:33 visit site in rain for lab inspection measure tool: amzn.to/2M5FR7S
Resurfacing a driveway with gravel
Resurfacing a driveway with gravel
Year ago
Using a 1988 cat d4c bulldozer to smooth out a driveway and push out some stumps. Then tailgating 3/4" gravel over the driveway and parking area. 0:00 looking at the job 4:10 starting with bulldozer 17:44 cleaning up a tree 24:32 getting gravel 36:13 spreading gravel with tractor 41:02 moving a swing set
Revisiting a concrete job and fixing gravel
Revisiting a concrete job and fixing gravel
Year ago
Revisiting a concrete apron in front of a garage I poured last season, and fixing a gravel driveway.
New water pump and tires for my pickup truck
New water pump and tires for my pickup truck
Year ago
Installing a new water pump and tires on a 1999 Dodge ram 2500 pickup with 5.9 gas motor. Timeline: 0:00 showing it overheating 4:10 bring it into the garage for repair 5:00 spare tire holder replacement 7:37 removing water pump 16:02 installing new pump 25:10 installing new tires 38:03 cosmetics on the truck 42:27 Pulling the truck out and talking about it 44:44 testing the truck towing a trailer up hill Tools used: Lift: amzn.to/2MK0Am4 antifreeze tester: amzn.to/2MMMTCA muriatic acid: amzn.to/2OYtrQR Big impact: amzn.to/2MsK22v Small impact: amzn.to/2PujRX4 Propane torch: amzn.to/2MqN8ny o-ring assortment: amzn.to/2MM4NFH cheap tire machine: amzn.to/2wmnqpk tire machine with balancer: amzn.to/2w8lQrU mud tires: amzn.to/2MueoBN spare tire holder: amzn.to/2MquJYa Tshirts: www.ebay.com/itm/183390302680
Cleaning up a fallen tree
Cleaning up a fallen tree
Year ago
Cleaning up a rotted willow tree that fell over, than trucking it away. Using a 1990 Yanmar b50 excavator and 1987 Ford F800 dump truck.
Filling dirt behind a retaining wall
Filling dirt behind a retaining wall
Year ago
Filling dirt behind a new bluestone retaining wall. 0:00 Loading dirt in my truck, and loading tractor on trailer 4:23 Looking at the condition of a driveway repair I did 4 months ago 8:10 Filling dirt behind wall
_ski2live_
_ski2live_ - 3 hours ago
Andrew, is that your Pops at the end of the video? Outstanding video btw!
Ben German
Ben German - 3 hours ago
Note to self. Buy stock in krylon when Andrew starts new project.
jackie oman
jackie oman - 4 hours ago
You should be a doctor you could fix me lol with a drop of this and that take away all my old broken pieces and fix them ๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Žyou so cool and you never stop
jackie oman
jackie oman - 4 hours ago
You should be a doctor you could fix me lol with a drop of this and that take away all my old broken pieces and fix them ๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Žyou so cool and you never stop
MrScott4020
MrScott4020 - 4 hours ago
Get an auger for your skidsteer, you'll through that pto auger away afterwards. ๐Ÿคฃ
Charles Owens
Charles Owens - 4 hours ago
Thankyou
p52457
p52457 - 4 hours ago
Andrew, You have 85,000 people tell you not use a wire brush on machined surfaces yet you still have the best videos on USa-video. I learn from both you and your experts that are helping you grow.
JERRY JAMES
JERRY JAMES - 5 hours ago
I enjoyed your computer video. Been there, done that. I have worked with computers and PCs since 1968. I first worked on an NCR 500 Posting computer doing patient accounting at our local hospital. Our monitor was a big cabinet of diodes we could read binary codes. We input the data using a big keyboard with rows of numbers. To input the letters "ABC" we would start all the way to the left aof the keyboard and press the number 2 the first row from 1 at the bottom through at the 0 at the top). A was 21 starting with the number 2 and a 1 in the next row to the right. B was 22 so we pressed the third row number to the right with a 2 in the third row and a 2 in the fourth row. C was 23. using a 2 in the 5th row and a 3 in the sixth row. We looked at the banks of lighted diodes to verify ABC. Such fun and we got to be pretty good. My first PC was an Epson laptop with a led display about three inches wide and an inch high. This allowed us to actually see the letters and or numbers. The program came on an EPROM. It was pretty good for a laptop. My wife took care of our bookkeeping on that thing and was really reluctant to give it up for a new IBM 386. We did not have internet back in those days but we did have bulletin board s with MIT using a 300 baud telco modem. I kept all the PC that I bought and put together until it was just too depressing to think about all the money I had spent on computer stuff. I smashed all of the old ones and destroyed old hard drives. My newest is now five years old with only 8gb of RAM and 500GB SSD and 3Tb storage drive. I have 1Gb LAN and 1Gb cable modem. I probably will not need anything faster because I can no longer keep up. with the 6 PCs in the house and a server in the shop. Care and feeding of these seven takes far too much time. Keep up the good work Andrew. Our world is a better place with you in it. JB
Shady Kiwi
Shady Kiwi - 5 hours ago
bloody hell Andrew get an auto garage door opener
ERIC EDMUND
ERIC EDMUND - 5 hours ago
LEVI ONE SWEET DOG.
Shady Kiwi
Shady Kiwi - 5 hours ago
will its become a thing now.. Andrews channel has overtaken the TV/Netflex this channel is awesome . Good stuff Andrew and thanks heaps keep them coming. Oh ps if your hiring id move from new zealand and come work with you for sure.....
ERIC EDMUND
ERIC EDMUND - 5 hours ago
LEVI SWEET DOG.
Gary Benninger
Gary Benninger - 5 hours ago
Itโ€™s been a year, you probably already know. You have double clutch. Thereโ€™s so much weight on that transmission you have to disengage the clutch to release the gear and then re-engage the clutch, allowing it to match the speed of the engine so it matches the next gear. The speed of the truck will prevent you from getting in to gears to high or too low. It takes some time to get a feel for it.
007 More
007 More - 5 hours ago
Has anybody seen ur x girlfriend after she did the chain saw vid..
Antonio Romero
Antonio Romero - 5 hours ago
Cuรกnto cuesta vivir al mes en ese lugar?
cringy child
cringy child - 5 hours ago
Why didnt you just hold the bar when using the tire machine???
John Coops
John Coops - 6 hours ago
Spends hundreds of hours building a driveway. Spends hundreds of hours digging up driveway to install electrical service. Spends hundreds of hours re-building driveway. DUMB.
KarasCyborg
KarasCyborg - 6 hours ago
Too bad you didn't have a forestry mulcher , you could just grind those trees down in place to wood chips. Add a stump grinder auger bit to recess the tree stumps below the ground level.
MrScott4020
MrScott4020 - 6 hours ago
One fellow excavator to another, good job man! Everyone gets stuck, deals with other miscellaneous problems, has to be in multiple places at once. But hardly anyone owns up to it on camera! ๐Ÿ‘
ERIC EDMUND
ERIC EDMUND - 6 hours ago
IS THERE ANYTHING ANDREW CAN'T DO ???????? AMAZING TALENT.
Mikah White
Mikah White - 6 hours ago
Andrew is a get it done kind of guy. He as superb work ethic.
Jman playz
Jman playz - 7 hours ago
This man is smart af. Like how?
Travis W
Travis W - 7 hours ago
Show 171 tires on your slip
jackie oman
jackie oman - 7 hours ago
Sure that pile didnt go backwards up ? My eyes lol ๐Ÿ˜Ž
Dmytro Riazanov
Dmytro Riazanov - 7 hours ago
Andrew, when do you plan to buy chainsaw for your kid?
Q Town
Q Town - 7 hours ago
Another job well done.
BehindThe Curtain
BehindThe Curtain - 7 hours ago
I hear this is where the cucked Jew lovers come to beat each other off๐Ÿง
damned1313
damned1313 - 8 hours ago
Be careful with that chain saw. Never cut with the tip. Thatโ€™s how kick backs happen. Always cut away from yourself. Never towards. And those hanging trees are called widow makers for a reason. Safety first.
Lunch Lady
Lunch Lady - 8 hours ago
Dogs doing whipits. Awesome
Justin Henry
Justin Henry - 8 hours ago
Wish I had that for fire wood
Shane Needles
Shane Needles - 8 hours ago
I thought about doing something like that, but it's so much better to just put my kids to work while I supervise. :-)
Troy Queen
Troy Queen - 8 hours ago
Thanks for the video ๐Ÿ‘,please remember to protect your lungs,silicosis is just as lethal as asbestos.
ERIC EDMUND
ERIC EDMUND - 8 hours ago
CONSIDERING I CAN'T DRAW A STRAIGHT LINE WITH A RULER ANDREW IS A GENIUS ,LOL
The last Engineer
The last Engineer - 8 hours ago
You are one insane operator! Talk about getting it done with a one man band ๐Ÿ‘
Phil B
Phil B - 8 hours ago
I'm so glad you actually used it, the chainsaw wasn't just a joke. It worked great as well
SONNY
SONNY - 8 hours ago
You know, one of the important things about you is sharing your time. Seriously, you take the time to grab us by the hand and walk us through what you're doing, did or plan to do. This camera tour was a perfect example as well. Know what, we (I) bought near the same RCA Docking Station VHS camera & VCR and did want to know about your drone. And PRESTO, here you have it in a video. I know I'm late in responding to this video but I actually just found you within the past month and I'm binging. You are one in a million, as are your dogs and of course you dad! Your work is like we are actually with you so thanks much for that. Say safe and God bless. Sonny (CT)
Paul Malatesta
Paul Malatesta - 8 hours ago
Great job and video.. Video was great
ForfeMac
ForfeMac - 8 hours ago
Using a wire wheel shirtless has to be worse than frying bacon shirtless
R Smitdog
R Smitdog - 9 hours ago
The area you live in Andrew is beautiful and it's great that you get drone footage of it, so cool to see it, thank you.Smitty
Charles Reohr
Charles Reohr - 9 hours ago
You got one hell of a toy err tool there.
Dave Heinrichs
Dave Heinrichs - 9 hours ago
The skeleton he dug up on one of his land clearing jobs.
R Smitdog
R Smitdog - 9 hours ago
That Lodge would be a awesome house !
R Smitdog
R Smitdog - 9 hours ago
Andrew, buy that snow track machine and re build it for a video ! that would be so cool!
Joshua BARTON
Joshua BARTON - 9 hours ago
My step father bought a brand new Husqvarna..He never tightened up the chain before using it for the 1st time and put a hole in the casing. Oil now will leak outta where it's cracked.My mother said I can have it.is there a way to fix the casing?Chainsaw is brand new I'd hate to throw it away.
SONNY
SONNY - 9 hours ago
OUTSTANDING!!! Andrew, OMG, you belong on "Late Night"! You took a 'chainsaw' to your dash radio opening. God bless you and I love every minute of everything you do. I do agree with you on what you had to say in an over hour video you made prior. YES, they can make them better but people wouldn't sign their name for new junk and BRAKE and FUEL LINES is the most STUPID and dangerous. Stay safe and thank you for all you do for all of us. Sonny (CT)
JonEilertsen (HellsatanX)
JonEilertsen (HellsatanX) - 9 hours ago
that thing works amazing
steve shoemaker
steve shoemaker - 9 hours ago
Thanks....Andrew...Guy you make very good video of this type....An'Oyes thanks for sharing your life with us in....USa-video land..!
Nick Mcnellis
Nick Mcnellis - 10 hours ago
Andrew, love the videos and they are very helpful to me as I just recently purchased 10 acres of woodlands in S. Jersey. I own a Kubota L48 and just recently purchased a mower deck and installed a thumb on the backhoe section. But now you have me considering a skid steer, so versatile. In any case your video's have provided insight as to how to tackle land clearing and many other tasks. Keep up the great work and stay safe.
Rob Lalonde
Rob Lalonde - 10 hours ago
I love the drone shots
just1Nic
just1Nic - 10 hours ago
Well, I have to say, I really enjoyed this...
cuenta clon
cuenta clon - 10 hours ago
So that's how this system works?it simply overflows the tank and drain on the leechs?or is that an emergency device just in case the truck can't empty the septic tank in time?
Richard Holbeck
Richard Holbeck - 10 hours ago
How about pressure washing? Is this before your hot water, pressure washer?
Richard Holbeck
Richard Holbeck - 10 hours ago
Your job is not done until the cleanup is done. What a rarity to see it in practice. Kudos. A shame they didn't let you finish it.
Kenneth Hume
Kenneth Hume - 10 hours ago
My dog loves to be massaged .
Thomas Marcelli
Thomas Marcelli - 10 hours ago
Andrew has such a iron will to get things done, he never seems to let problems get in his way! If a machine breaks down (which would upset the rest of us), Andrew seems to take it as an opportunity to make another video!! Man I wish I could do that!!
Steven Noel
Steven Noel - 11 hours ago
Andrew nice choice of music , Beethoven Egmont Overture.
Tofthill4
Tofthill4 - 11 hours ago
adding just one gallon of water per cubic yard of concrete will have the following effects and should be avoided as much as possible Increase the slump about one inch; Cut the compressive strength up to 200 psi; Waste the effect of 1/4 bag of cement; Increase the shrinkage potential about 10 percent; Increase seepage potential by up to 50 percent; Decrease the freeze/thaw resistance by 20 percent; and Decrease the resistance to de-icing salts.
Eddi HDZ Giron Transportes Hero
Eddi HDZ Giron Transportes Hero - 11 hours ago
Cummins big cam 300hp with Jake brake the best engine ever u have a really nice dump truck
Thomas Marcelli
Thomas Marcelli - 11 hours ago
I can't figure out why Andrew's videos are so additive?? A average guy doing extra extraordinary things with average equipment?? I don't know but I can't stop watching!!!
Robert cornelisse
Robert cornelisse - 11 hours ago
I watched you for the first time 5 months ago. I love your channel. I see you have 334.000 subscribers now. You doing great, thank you.
Darwin Dwelle
Darwin Dwelle - 11 hours ago
Andrew you're a workhorse.
Phil B
Phil B - 11 hours ago
I think the big excavator a slow leak in the hydraulics somewhere 51:44
Billy d
Billy d - 12 hours ago
Does this cat employ a full time landscaper or really enjoy landscaping. Dang
Frank Rodriguez
Frank Rodriguez - 12 hours ago
GREAT JOB ON THE HOME , GREAT VIDEO, LOVE THE EDITING AND MUSIC AND SPECIAL EFFECTS WITH THE DRONE MIX IN WITH YOUR VIDEOS...KEEP THEM COMING.
Donnie Robertson
Donnie Robertson - 12 hours ago
Great job
Phil B
Phil B - 12 hours ago
Why does that dirt look dry underneath?
Donnie Robertson
Donnie Robertson - 12 hours ago
Nice job
No Nope
No Nope - 13 hours ago
Have a Mason come dry stack that beautiful stone!
Donnie Robertson
Donnie Robertson - 13 hours ago
Nice job
oo oo
oo oo - 13 hours ago
That dog will have cement burns if you don't wash it off quick
Donnie Robertson
Donnie Robertson - 13 hours ago
Nice job
Jeff In Chicago
Jeff In Chicago - 13 hours ago
I never saw such a mower! It not only cuts everything, it "eats it up". Where does it all go? AND AIR CONDITIONING. I am shook.
Douglas Miller
Douglas Miller - 13 hours ago
The only time you need to use the clutch is to startup,It takes practice but you will get there.we used to cut one piece brakes out with a torch.Better than pulling transmission.
Robin C
Robin C - 13 hours ago
nothing like living in a place with free rock. that would have cost a FORTION here
davidmellott50
davidmellott50 - 13 hours ago
My hands are starting to shake, and a slight sweat is forming on my brow, as I start to feel withdrawal symptoms as I hunt for a video I have not seen. What's going to happen when you run out of thing to talk about, Oh god I hope that never happens. Keep up the very informative work you do, that helps me with my equipment as I develope my 80 acres. You are an absolute Godsend.
oo oo
oo oo - 13 hours ago
GET OUT OF THAT BASEMENT WITH THOSE PROPANE HEATERS IT'S FULL OF CARBON DIOXIDE
James Mckenna
James Mckenna - 13 hours ago
19:05 clever
Julie Snook
Julie Snook - 13 hours ago
Lovely sounds of birds
Dennis The Menance
Dennis The Menance - 14 hours ago
use Jack Stands? Why? Ain't NoBody around that coud Hear him Yell for Help Anyway, Right? He could be Injured and die before anyone finds him.. Oght to First have a Emergency Back up plan for that Andy.. Maybe one of them Buttons you ry taht Will send a Signal to your O[Phone to Call Someone..Don't need to have to pay a Monthly fee with.. saw them at Wal Mart and Best Buy ..You Dial in the # it should call.. Hope that helps.. and just keeping you informed and Honest..;-)
Mark
Mark - 14 hours ago
No clue why youtube thought I would think this was interesting.. but they were right!
H.M Murdock
H.M Murdock - 14 hours ago
Ok if it don't fit ! ......take a chainsaw to it lol love it
Benjamin
Benjamin - 14 hours ago
best channel on youtube
Antonio M
Antonio M - 14 hours ago
Tira esa casa de madera y hazte una de ladrillo de verdad
Zac Ferguson
Zac Ferguson - 14 hours ago
I think a teddy bear is trying to put you in a choke hold!
Dennis The Menance
Dennis The Menance - 14 hours ago
I see this and often wonder, what he would be with a Engineering Degree? And how he could help not only making America remain Great, but Improve the World we all Live in.. Sure hope you have at least 1 if not 2 sons Andy
Christian Wรถrstenfeld
Christian Wรถrstenfeld - 14 hours ago
Yeah, really sucks ๐Ÿ˜‚๐Ÿ‘๐Ÿป
Rafael Parada
Rafael Parada - 15 hours ago
I have never seen anyone fight with a tire for so long ๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚. And for those who are gonna criticize my comment and tbh I can't even take a 4 wheeler tire off of a rim.
Antonia Cardoso
Antonia Cardoso - 15 hours ago
VOCรŠ ร‰ DEMAIS ANDREW, PARABร‰NS.
R Smitdog
R Smitdog - 15 hours ago
Hi Andrew, have you ever seen Bigfoot, Satcquatch or seen foot prints, twisted trees, bent trees, trees placed in a x formation, teepees , ? any wood knocks or vocalization or anything ?
Kevin Chapman
Kevin Chapman - 15 hours ago
Had me laughing the minute he said it was rented, but as usual our man got the job done, absolute legend.
LongBinh70
LongBinh70 - 15 hours ago
Nice video. My only question came at back-filling the septic tank. It appears in the video that you just covered up the unused entrance hole in the center of the uphill side, 14:56. Was that blocked off internally?
Bobs Youruncle
Bobs Youruncle - 15 hours ago
The girl is a keeper.
Rob Lalonde
Rob Lalonde - 15 hours ago
Does the windshield close up so you can keep warm inside during the winter
Chris Snelling
Chris Snelling - 15 hours ago
Andrew as a retired mechanic, , Iโ€™m trying to help !! Itโ€™s not good practice to hit or press NEW bearings on the inner/centre race as the ball bearing or Timken tapered rollers will damage the bearing tracks leading to premature failure. Always use the outer bearing race. Remember a hammer is case harden and can send splinters off if hitting a hardened bearing . You do some great work and fantastic videos .Thank you mate ๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‡ฌ๐Ÿ‡ง
Mark G.
Mark G. - 15 hours ago
Andrew Camarata = Lady Slayer.....You Go My Brother!!
Barry Smith
Barry Smith - 15 hours ago
Crafting & problem solving, level 100, always interesting to watch.
08Budweiser
08Budweiser - 16 hours ago
kubota svl90 90 2
AleKiller507 L
AleKiller507 L - 16 hours ago
I think your Car is a little bit Dirty just a little ๐Ÿ˜‚๐Ÿ˜‚
Zac Ferguson
Zac Ferguson - 16 hours ago
the guys legs are smaller than the concrete hose he was holding.
Karl Ponte
Karl Ponte - 16 hours ago
There are three things you can watch forever: fire burning, water falling , and how Andrew is working.