How to Rebuild the Entire Front Suspension in your Car or Truck

71 986
975
 
Comments
ChrisFix
ChrisFix - 3 months ago
Did you guys get notified by YouTube that the video was posted? Also when you watched the video, was there a screen that said "this video was flagged by the YouTube community and may be offensive" or something like that? Just wanted to check because I had issues last night which is why I had to postpone publishing the video. I hope it's all fixed and you guys learn a lot from the video! Stay tuned for the next video and then for a video that, well, covers a life changing event ;)
Also for those asking why I am wondering, here is what happened last night when I went to publish: https://www.instagram.com/p/BwI-VOhFkt2/
Erik Johnson
Erik Johnson - 2 days ago
I’m offended by the fact that I only discovered your channel this year. Your USa-video channel is #1 for me. I can’t thank you enough. Totally inspired. I went through some deep depression this year. Your videos renewed my zest for life. I’m eternally in your debt. Sorry to get all deep! But you’re helping people in ways you might not even know.
KSP Guy
KSP Guy - 5 days ago
No nothting
RedNinja
RedNinja - 7 days ago
No surprisingly nothing at all
RedNinja
RedNinja - 7 days ago
I dont come here tutorials its just kinda satisfying
EJSFilms2K
EJSFilms2K - 6 hours ago
I think ChrisFix is really HowToBasic
Taylor Smith
Taylor Smith - 8 hours ago
YOU ACTUALLY DROVE THAT WTH
Sukha saini
Sukha saini - 16 hours ago
Good bro. ..we grab too much information
Dayton Larson
Dayton Larson - Day ago
Dude... You are actually a genius. All your little tricks would have saved me YEARS OF MY LIFE!
Mr Alexander
Mr Alexander - Day ago
Great video bud. Fantastic explanations very well said and straight forward and clear. Very professional
Cranberry
Cranberry - Day ago
You should save up to get your driveway and garage redone and start doing vids in there love the content keep it up ❤️❤️❤️
HoT BoiAliaHereGucciFlipFlop
12:52 DEEEZZ NUTS LOL
Boosted Honda
Boosted Honda - 2 days ago
Make a video on how to install a turbo kit
Joe
Joe - 2 days ago
you made it look so easy on that old car, i took the wheel bearing off rear of my subaru and basically every bolt had to be cut off and replaced
adam smith
adam smith - 2 days ago
I'm confused: if you're literally replacing everything, why not just use an angle grinder to cut all this stuff off?
Mercer Frey
Mercer Frey - 2 days ago
Cause that's not how it works.. trust me on this one
BeefGamer 23
BeefGamer 23 - 2 days ago
19:55 this tool is abused. Call 157-269-521 to stop the abuse of tools. (Not a real number)
David Chang
David Chang - 3 days ago
@ChrisFix: How do you seal off the hole to the transmission when you power wash the wheel space?
Mate Matiashvili
Mate Matiashvili - 3 days ago
Plz add turbo
Cody Shields
Cody Shields - 3 days ago
Was the silver paint por 15?
Bts Lover
Bts Lover - 3 days ago
Awesome tutorial
Amanullah Jadoon
Amanullah Jadoon - 4 days ago
I find your video very decent and informative
MetallicaFan81
MetallicaFan81 - 4 days ago
Chris, are you doing a suspension rebuild in the rear? And the roll cage in the stang?
Nigel Perez
Nigel Perez - 4 days ago
Did Chris fix go to mechanic school?
Kermit The clasher
Kermit The clasher - 4 days ago
Looks like me jerking off to porn 😂😂 7:02
Clorox Bleach
Clorox Bleach - 4 days ago
I'm used to trucks. Everything on that car seems miniscule.
Adrian Caliman
Adrian Caliman - 4 days ago
19:58 Ouchh, fingers
Cameron Gasco
Cameron Gasco - 4 days ago
I really really want this beaute!!!!!
twatflaps
twatflaps - 5 days ago
Why smack the upsidedown nut to get the ball joint out?
Easier to hit the arm where the pin sits
Dharmesh Ojha
Dharmesh Ojha - 5 days ago
like your videos but you should consider showing how the car drives after replacement or repair, your experience like what kind of improvement in, sound , torque, suspension in this case. ...
Han Zhang
Han Zhang - 5 days ago
Amazing video. We have a copycat trying to be a Chinese version of Chrisfix and I wish he were only 10% as good as you
FORFEITURE SERVICES
FORFEITURE SERVICES - 6 days ago
Hey wait a second; you found your 10MM socket; what kind of shenanigans is that?
Asking for a friend!
Just had to throw that out there; Great videos brother!
Cessius
Cessius - 6 days ago
You would make an amazing mechanic teacher man, good job, well thought out, planned and executed. Make it look so easy
Brayden's ASMR
Brayden's ASMR - 6 days ago
Hey chris I have a 95 delsol and it takes a lot of rotations to start it what could it be
Brayden's ASMR
Brayden's ASMR - 5 days ago
The other day the spark plugs where wet and I took them out and set them on fire to burn off all the gas and out them back in and it fired right up.
Brayden's ASMR
Brayden's ASMR - 5 days ago
The thing is that battery is new
Kaosu Uzu
Kaosu Uzu - 5 days ago
If it's starting up but just taking a lot of turns then more than likely your car battery is dying either from lack of charge or just being bad. If you can, get it to a parts store (advanceautoparts, Autozone, etc) and bring it inside. They'll test it and charge it for you completely for free. If you do need a new battery they have some decent ones at the store you'll go to until you can afford a completely brand new battery.
Joeyplaysgames
Joeyplaysgames - 6 days ago
Now I had doubts that I could use the hub hammer, it was an intimidating name but when I saw it in action I had realized something. I have been training to use a hub hammer my entire life!
Saif Ahmed hareb Alotaiba
the new crazy russian hacker XD
Saif Ahmed hareb Alotaiba
i have no hate towards you XD
Thomas Mica
Thomas Mica - 6 days ago
я подписался
Mike Zhang
Mike Zhang - 7 days ago
Just love you! Keep uploading more videos please!
ejhyde44
ejhyde44 - 7 days ago
Hey chris, love your videos. Quick question. If you did this and your steering wheel is in its normal spot. The steering isn't tight still after getting it aligned and new wheels. I am thinking rack and pinion. Can you do a video on replacing a rack and pinion?
Randy Thompson
Randy Thompson - 7 days ago
Chris , are you going to be doing a jeep wrangler project any time soon?
Randy Thompson
Randy Thompson - 7 days ago
I wanna buy a car from Chris.
midgetrace
midgetrace - 7 days ago
Great video I just subscribed you only left out the cleaning of the pad holders,it,s the rust in the holder that locks up the pads
RedNinja
RedNinja - 7 days ago
Probs been flagged cause u said nut, fluid, etc idk why but its not in that context
RedNinja
RedNinja - 7 days ago
I dont watch for tutorials i come for satisfaction
Matjaž Kajba
Matjaž Kajba - 7 days ago
has to remove philips, uses pozy....
Juan C
Juan C - 8 days ago
Do you film and then narrate during editing? Or as you doing it?
Juan C
Juan C - 8 days ago
It amazes me how Chris Fix has 10 and 5 times the view of drag times and 717 street speed, with cars that cost 1/100th of what their cars cost.
I guess fixing beater civics are more relatable than McLarens.
Manny Rastegar
Manny Rastegar - 8 days ago
07:01 ""(Holy cow that''s too much exercise for his Willy Pete)"
ASMR BugB
ASMR BugB - 8 days ago
Is Chris self taught or does he have a professional background???
SanityOne
SanityOne - 8 days ago
Just hit the bell...thanks...great video so far.
Leon Jones
Leon Jones - 8 days ago
That rust on the ball joints are the same age as me probably
Mystic Panda
Mystic Panda - 9 days ago
14:48 Pink Fan XD Wth
Christian De La Rosa
Christian De La Rosa - 9 days ago
I just like to watch his videos ... so informative and enthusiastic..!!!!
live and let live
live and let live - 9 days ago
It's a manual I thought they dont have tranny fluid
JaysCTR
JaysCTR - 9 days ago
Thank you for this your so detailed its amazing but that car is rusty as hell under there hehe
Next videos